Ground Source Heat Pump
What is a Ground Source Heat Pump and How Does it Work?
- A Ground Source Heat Pump uses the energy stored in the ground to heat your home and provide hot water all year round.
- It is based on one simple principle, heat transfer – using a small amount of energy to transfer low-grade heat from the ground to high-grade heat, heating water to high temperatures. Essentially transferring heat from a ‘free heat source’ like the ground to a ‘heat sink’ like your home.
- Loops of piping are placed in the ground at a depth of approximately 1m, or in a bore hole up to 150m deep, where the ground is at a constant temperature of 10°c or higher. The pipes contain a liquid refrigerant which absorbs the ground’s heat and transfers it to the Ground Source Heat Pump located inside the house. This heats the water to high temperatures, either for hot water use or space heating, through a radiator or underfloor heating system.
- Even on the coldest day a Ground Source Heat Pump can harvest renewable heat energy from the ground and transfer it inside the home.
The entire process is highly efficient and can provide cheap, reliable hot water and central heating for your home for the life cycle of the pump, which is in excess of twenty years¹.
Why Install a Ground Source Heat Pump?
- Improves your heating efficiency – Virtually maintenance free and silent to run, a Ground Source Heat Pump is able to produce more energy than they consume, with every 1kW used providing up to 4kW of energy out
- You could earn over £23,000 in RHI payments
- Save up to £1,470 on your heating bills
- Reduce your output of carbon emissions, helping in the fight against the worrying effects of climate change
Ground Source Heat Pumps can reduce your annual heating and hot water bills by up to 50% against fossil fuel alternatives² and it often pays for itself within the grant period set out within the Renewable Heat Incentive³ (7 years of payments for a domestic property).
However, each and every property is different so upfront cost, bill reduction and your ROI
What is the Renewable Heat Incentive?
The RHI is a Government backed scheme which pays the owner of a renewable technology, such as a heat pump, for generating renewable energy on site. To qualify for these quarterly payments, which last seven years, you will need to use an MCS accredited company – such as Ecovision – and ensure your MCS accredited product is installed to MCS standards.
The MCS (Microgeneration Certification Scheme) is there to ensure the system is safely installed by professionally qualified installers and performs to the standards required by the Government.
How do I apply for the Renewable Heat Incentive?
The RHI is administered by Ofgem and as the owner of the system, you will need to make the application for the RHI. We will of course ensure you have all the required paperwork to successfully complete this; this is supplied as part of your handover pack and we will be on hand to help at any point throughout the process.
How long do Ground Source Heat Pumps take to install?
The installation of a Ground Source Heat Pump can take anywhere between 4 weeks and 16 weeks, depending on the size and complexity of the pump location. As there are many elements that come together during this process Ecovision offer an all-inclusive installation, including everything from digging the trenches to commissioning the Ground Source Heat Pump.
Can I change the temperature within my home?
The heat pump will be weather compensated which means that you set the temperature you want within your home and the heat pump uses the least amount of electricity required to achieve the desired temperature.
As the outside temperature reduces, or indeed increases, the heat pump will automatically react and adjust its output to maintain your chosen internal temperature. It does this via a range of sensors strategically placed within the system – you simply set your desired temperature and let the heat pump do the rest.
Our customers often report an improvement in comfort levels as the heat pump maintains a constant temperature rather than allowing the internal temperature to fluctuate based upon a traditional time clock.
Will a Ground Source Heat Pump keep me warm in winter?
Yes, the system will be capable of providing all of your heating and hot water throughout the year without any requirement for a supplementary boiler.
Do I need to coordinate any other trades on site?
No, Ecovision can undertake the entire installation, providing the complete design, supply, installation and commissioning of the system, without any need for third parties or subcontractors.
During Ecovision’s many years of business we have found the biggest issue for customers is ensuring that everyone knows what and when their responsibility starts and ends. We have found that by offering the complete installation we ensure that we remain in control of the whole process as well as being entirely responsible for the successful completion of the installation with our in-house installers reporting directly to Ecovision.
Does a Ground Source Heat Pump require lots of maintenance?
Ecovision can complete this task as part of an annual service, leaving you with absolutely no maintenance requirements.
Will a Ground Source Heat Pump work with my existing radiators?
Ecovision will have to complete a full room-by-room emitter (radiator) assessment before any installation takes place to ensure your existing radiator circuit is capable of emitting the heat required. This is a government requirement in order to be eligible for the RHI subsidy.
We usually find that most of the radiators are suitable but that some will need to be changed to meet the government’s accreditation standards. These changes will ensure the lowest possible running costs and the cost of any changes will be made clear in your quotation.
¹Age of System Source: Energy Saving Trust. Please note that this figure may be more or less achievable depending on manufacturer.
²Energy savings based on replacing an existing G-rated LPG boiler in a typical well insulated four-bedroom detached home with an average Ground Source Heat Pump installation (Energysavingtrust.co.uk).
³Potential earnings of £23,000 in RHI payments for installing a Ground Source Heat Pump based on a 3+ bed detatched house (Which.co.uk). RHI payments are based on the annual estimated payments in the potential earnings over the seven-year period. You can also earn an additional £1,610 over 7 years when you install a Domestic MMSP monitoring system (Ofgem.gov.uk).