Underfloor Heating

What is Underfloor Heating?

Traditional radiators generate an upward stream of hot air through convection, causing the air at ceiling level to be much warmer than at floor level. Underfloor heating systems also operate through convection but essentially turn your whole floor into a giant radiator, ensuring a greater consistency of heat throughout your home and allowing you to feel the heat benefit immediately. Usually, when a company like One Hour Bros is consulted with about installing underfloor heating, the whole floor would need to be renovated and the flooring chosen to absorb the heat and enable the underfloor heating to work. The company would need to carefully and professionally fit the pipes so that the act of convection can take place.

So this means plastic pipes will be concealed under the floor of a property or room which allows heat to radiate upwards when warm water circulates throughout. This underfloor placement ensures that heating is evenly distributed whilst avoiding the need for visible radiators taking up valuable wall space.

As the surface area of underfloor heating pipes is many times greater than that of a radiator, the temperature of the water in the system is not required to be at such a high heat – with traditional fossil fuel based radiator systems drawing water from your system at 70-80 C and comparative underfloor systems draw water at 45-65 C. Either way, these systems will need to be maintained and possibly repaired at some point throughout their lifecycle, to improve reliability and efficiency once more you have the option to look at furnace repair or other heating repair services to complete repair work to better your system again.

Why consider Underfloor Heating with Heat Pumps?

Due to the reduced temperature, underfloor heating works particularly well when paired with a heat pump installation. The heat pump does not have to work as hard to produce high temperatures, less electricity is needed to power the heat pump and therefore a greater cost saving is achieved. The two work perfectly alongside each other to provide a constant temperature throughout the day. If you however find this not to be the case, and the underfloor heating isn’t working as efficiently as you’d hoped, it could perhaps be in issue coming from the main source = the furnace. If this is the case, you’re better off looking at Boulden Brothers or similar experts in the field to see if they can help fix the issue, so your underfloor heating is working as well as it should be.

Underfloor heating is also safer, with no chance of young children burning themselves on hot radiators, and is recognised to be healthier, especially for asthma sufferers, as it reduces airborne dusts. Furthermore, in buildings heated by underfloor systems you can normally expect to be able to turn your room stat down by 1-3 C yet retaining the same thermal comfort as radiators operating at the higher temperature.

underfloor heating with heat pumps explained - ecovision